An all-new handheld oscilloscope Hantek 2D72 is a compact and lightweight concept but with a new generation of 3 in 1 multifunction tester: oscilloscope, signal source and multimeter; A small volume of the non-profit grip by a single hand; The suspendingstand was designed to support multi-angle adjustment; Ultra-low-power, Type C charging interface, each 2 hours battery charge allow working one full day or standbytwo months; High-definition color LCD screen display clear and delicate; Minimalist keyboard design simplifyoperation, easy to use.

Features:

• Oscilloscope + Waveform Generator + Multimeter: This multi-purpose station own three universal test instrument functions. It is outgoing right-hand product for engineers.
• Intelligent charging control: Its lithium batteries can be recharged byeither high current-5V/2A or ordinary computer USB interface. Allow while charging, while using, very convenient and handy;
• Ultra-low power design: Type C charging interface, after every recharge of 2 hours, the device can be used continuously for a full day or standby more than two months;
• Large-capacity lithium battery power supply:  18650 replaceable lithium battery power system, free from replace battery;
• 5V/2A charger + Type C charging cable: Type C power + data transfer interface, can share the charger and data cable with your mobile phone;
• AUTO one-key test: Magic tool and essential function for test newbie;
• Volume small, one hand holding: The 45 degree suspension bracket design provide you a work station anywhere anytime;
• One key page out, quick compare two groups of reference waveforms + 6 groups of waveforms storage, simple and effective;
• Digital voltmeter function: automatic frequency and amplitude measurement, convenient and worry-free;
• Its cursor measurement functionsupports time and voltage manual measurement, and measure the required waveforms accurately;
• One-click switching its Chinese and English language menu;
• Color LCD screen: exquisite and smooth lines make the waveforms clear and undistorted when magnify;
• Minimalist keyboard design simplify operation, convenient to use;
• Unibody casing: fine touch feeling, favorable impact resistance, outstanding heat resistance, easy to disassemble;
• Self-calibration function: free from level drift after long time unused;
• Universal multimeter function: voltage, current, resistance, diode, capacitor, on-off test;
• Waveform generator output function: output sine, square, triangle, trapezoidal and other waveforms; sine up to 25MHz;
• Function of video help: scan code on back of machine to get help of video course;
• The PC software supports windows7/8/10 32-bit and 64-bit.

Specifications:

• Horizontal
  • Sample Rate Range: 250MSa/s (Single-channel), 125MSa/s (Dual-channel)
    Waveform Interpolation: (sin x)/x
  • Record Length: Max. 6K for single-channel;
  • 3K samples per dual-channel
    SEC/DIV Range: 5ns/div~500s/div 1, 2, 5 sequence
• Vertical
  • A/D Converter: 8-bit resolution,each channel sampled simultaneously
    VOLTS/DIV Range: 10mV/div~10V/divat input BNC
  • Bandwidth Limit, typical: 20MHz
  • Low Frequency Response (-3db): ≤10Hz at BNC
  • Rise Time at BNC, typical: ≤5ns
  • DC Gain Accuracy: ±3% for Normal or Average acquisition mode, 10V/div to 10mV/div
  • Note: Bandwidth reduced to 6MHz when using a 1X probe.
  • Acquisition Modes: Normal
• Trigger
  • Type: Edge
  • Mode: Auto, Normal, single
  • Level: ±4 divisions from center of screen
  • Trigger Level Accuracy: 0.2div X volts/div within ±4 divisions from center of screen
    Slope: Rising, Falling, Rising & Falling
  • Source: CH1/CH2
• Input
  • Coupling: DC, AC or GND
  • Input Impedance,DC coupled: 25pF±3 pF, 1MΩ±2%
  • Probe Attenuation: 1X, 10X
  • Supported Probe Attenuation Factors: 1X, 10X, 100X, 1000X
  • Maximum Input Voltage: 150VRMS
• Measurement
  • Automatic Measurements: Frequency, Amplitude
  • Arbitrary Waveform Generator Mode
  • Waveform Frequency: Sine: 1Hz~25MHz; Square: 1Hz~10MHz; Ramp: 1Hz~1MHz; EXP: 1Hz~5MHz
  • Sampling: 250MSa/s
  • Amplitude: 2.5Vpp(50Ω): 5Vpp(High impedance)
  • Frequency Resolution: 0.10%
  • Channel: 1CH waveform output
  • Waveform Depth: 512Sa
  • Vertical Resolution: 12 bit
  • Output Impedance: 50 Ω

Pacakge including:

• 1 * Probe
• 2 * Clip Probe
• 1 * Type Charging Cable
• 1  *PowerAdapter
• 1 * Multineter Probe
• 1 * Hantek bag
• 1 * Instruction manual