Features:

• PCB Color: Red/ Green (Random)
• Support for 4-axis linkage, you can connect four stepper motor drives or servo drives.
• Maximum step-pulse frequency is 100KHz, which is suitable for the servo or stepping motor.
• Support automatic probe tool.
• Support emergency input.
• Support for limit switch.
• Support for connecting electronic hand wheel.
• Need use external 24V DC power supply to isolate USB and external port, and to make the system more stable.
• Have 0-10V output port, you can use MACH3 software to control the spindle motor speed.
• 4 general-purpose inputs, you can connect the limit switch, estop switch, probe switch, back to zero and other device.
• 4 general-purpose isolated relay drive output interface, can drive four relays for controlling the spindle starts, forward rotating and reverse rotating, pumps and other device.
• 1 Status LED, indicate connection status on the board.

Setup Instructions:

• Step 1: You need to install Mach3. If you already have installed Mach3, skip this step.
• Step 2: Unrar the USB Motion Driver RnRMotion.dll, copy and paste the file into your Mach3 Plugins folder Example: "C:/Users/ProgramFiles/Mach3/Plugins"
• Step 3: Make sure you board is connected to the PC via USB cable. It will automatically recognize the USB device.
• Step 4: Open Mach3 and you should be prompted to select a driver. Select the "RnRMotionController" and check "Don't ask me again". This will allow your board to communicate with Mach3 controller.
• Step 5: Copy the XML Mach3 Config "Mach3Mill.xml" in your Mach3 root folder.

Package Included:

• 1 x USB CNC Controller Card
• 1 x USB cable
• 1 x CD