Description:

• This is a complete GPS module that is based on the Ublox NEO-6M.
• This unit uses the latest technology from Ublox to give the best possible positioning information and includes a larger built-in 25 x 25mm active GPS antenna with a UART TTL socket.
• A battery is also included so that you can obtain a GPS lock faster.
• This is an updated GPS module that can be used with ardupilot mega v2.
• This GPS module gives the best possible position information, allowing for better performance with your Ardupilot or other Multirotor control platform.
• The Ublox NEO-6M GPS engine on this board is a quite good one, with a high precision binary output.
• It has also high sensitivity for indoor applications. UBLOX NEO-6M GPS Module has a battery for power backup and EEPROM for storing configuration settings.
• The antenna is connected to the module through a ufl cable which allows for flexibility in mounting the GPS such that the antenna will always see the sky for best performance.
• This makes it powerful to use with cars and other mobile applications.
• The Ublox GPS module has serial TTL output, it has four pins: TX, RX, VCC, and GND.
• You can download the u-center software for configuring the GPS and changing the settings and much more.
• It is really good software (see link below).

Specification:

Features:

• 5Hz position update rate
• Operating temperature range: -40 TO 85°CUART TTL socket
• EEPROM to save configuration settings
• Rechargeable battery for Backup
• The cold start time of 38 s and Hot start time of 1 s
• Supply voltage: 3.3 V
• Configurable from 4800 Baud to 115200 Baud rates. (default 9600)
• SuperSense ® Indoor GPS: -162 dBm tracking sensitivity
• Support SBAS (WAAS, EGNOS, MSAS, GAGAN)
• Separated 18X18mm GPS antenna