PrintFix Liquid Glue is a high-performance build plate adhesive developed specifically for reliable 3D printing bed adhesion. It ensures strong and consistent first-layer bonding across a wide range of filament materials including PLA, ABS, PETG, PET, ASA, and TPU. This liquid glue performs effectively on multiple build surfaces such as Cool Plate, High-Temperature Plate, and Textured PEI Plate, making it suitable for modern FDM 3D printers.

A small amount and single use can last multiple 3D prints. You can re-use the build plate until the glue is wear out from the plate. So, it's very efficient and effective.

Available from BDTronics, a trusted 3D printing and electronics supplier in Bangladesh, PrintFix Liquid Glue helps prevent common printing issues like warping, edge lifting, and print detachment while still allowing easy and clean model removal after printing. A single thin application can support multiple print cycles, making it highly efficient and cost-effective for both professional and hobbyist users.

Features:

• Strong and consistent adhesion for stable first-layer bonding

• Prevents warping, curling, and model detachment during printing

• Easy model removal after print completion

• Leaves minimal residue on build plate and printed models

• Smooth and uniform liquid application

• Low-odor, environmentally friendly formulation

• Compatible with Cool Plate, High-Temperature Plate, Textured PEI Plate

• Works with PLA, ABS, PETG, PET, ASA, TPU filaments

• One application lasts for multiple print jobs

Recommended Bed Temperature Settings:

• PLA: 40–60°C

• ABS: 90–100°C

• PETG: 60–80°C

• PET: 80–100°C

• TPU: 30–45°C

• ASA: 90–100°C

How to Use:

• Gently press the applicator head to open the internal valve

• Apply a thin and even layer over the entire build plate surface

• Ensure uniform coverage before starting the print

• Begin 3D printing once the glue is evenly spread

• After printing, wash the build plate and model base with water

• Allow the surface to dry fully before reapplication

Applications:

• FDM 3D printing with PLA, ABS, PETG, PET, ASA, TPU

• Improving first-layer adhesion on smooth and textured surfaces

• Preventing print lifting and edge curling

• Enhancing print success rate for large or tall models

• Daily use in professional, educational, and home 3D printing

Product Instructions:

• Apply only one thin layer; multiple layers are unnecessary

• Avoid excessive squeezing to prevent over-application

• Adjust bed temperature for filaments requiring higher adhesion

• Keep the bottle tightly sealed after use

• Store away from direct sunlight and high temperatures

Specifications:

• Working Life: Up to 100 uses (full plate coverage per coat)

• Package Volume: 60 mL

• Package Weight: 80 g

• Package Size: 30 × 30 × 139.5 mm

BDTronics, PrintFix liquid glue, 3D printer bed adhesive, 3D printing glue Bangladesh, build plate adhesion solution, PEI plate glue, cool plate adhesive, high temperature plate glue, PLA bed adhesion, ABS bed adhesion, PETG bed adhesion, TPU bed adhesion, ASA bed adhesion, 3D printer first layer adhesion, liquid glue for 3D printer, BDTronics 3D printing accessories, 3D printer glue Bangladesh