The Drag Chain 10x15mm R18 Cable Carrier is a reinforced nylon drag chain designed to guide and protect cables, hoses, and tubing in machines with reciprocating movement. BDTronics provides this cable carrier for CNC, engraving, automation, robotics, and prototyping applications in Bangladesh. It is commonly used where moving wires need controlled cable management instead of loose routing.

Features:

• Reinforced nylon PA66 construction for wear resistance in moving machine axes
• 1 metre drag chain length with 10 mm internal and 15 mm external size
• R18 bending radius for controlled cable and tubing movement
• Openable sections allow cables, tubing, and hoses to be installed without threading
• Designed for reciprocating motion and low-noise, high-speed movement
• Helps prevent cable tangling, abrasion, and strain during machine operation

Specifications:

Applications:

• CNC machine tools and engraving machines
• Robot and automation cable management
• Electronic equipment and automated warehouses
• Stone, glass, doors and windows machinery
• Injection molding machines and other reciprocating machine movements

BDTronics supplies this 10x15 R18 drag chain for builders and repair users who need a compact cable carrier for moving machine parts. The openable link sections make it practical to add or replace cables and tubing during assembly or maintenance.

How to Use:

1. Check that the cable or tubing fits the 10 mm internal size and that the machine movement is compatible with the R18 bend radius.
2. Open the required chain sections and place the cable, hose, or tubing inside.
3. Close the covers so the cable is held neatly within the drag chain.
4. Mount the chain along the moving axis with enough clearance for its bend radius.
5. Test the machine movement slowly and confirm the chain moves smoothly without pulling or pinching the cable.

Installation and Wiring:

Install the drag chain between the fixed and moving parts of the machine. Route cables and tubing through the opened sections of the chain, then close each section to secure them. Keep cable slack controlled and avoid sharp bends beyond the R18 radius. Use suitable machine fasteners for the mounting points and confirm the chain is aligned with the direction of movement before normal operation.

Compatibility:

• Engraving machines and CNC setups that use a 10x15 mm, R18 drag chain
• Reciprocating machine axes requiring cable, hose, or tubing protection
• Robotics, automated equipment, and general machine cable management

Safety Information:

• Do not exceed the specified R18 bending radius.
• Ensure cables and tubing are secured before running the machine.
• Check alignment and clearance before high-speed operation.
• Inspect the chain periodically for wear or damage.

Package Includes:

• 1 x 1m Drag Chain 10x15 R18 Cable Carrier

1m drag chain, 10x15 drag chain, R18 drag chain, cable carrier, wire carrier, engraving machine drag chain, CNC cable chain, cable management chain, PA66 drag chain, 10x15 R18 cable carrier, 1m cable carrier, drag chain Bangladesh, BDTronics