Water Level Sensor Float Switch P43 is a device used to sense the level of liquid within a tank. The switch may actuate a pump, an indicator, an alarm, or another device. It can be easily converted from normally open to normally close by inverting the float. Note: because the current that the switch can carry is much little(0.5A), you must use a relay or contactor when it is connected by a load, relay and contactor are not included here. This float switch is a simple structure, easy installation liquid level controller. It does not have a complex circuit, will not be disturbed, as long as the material selection, liquid, pressure, or temperature can be used in any environment. Lightweight and simple working principle, high reliability. The versatility of this vertically mounted sensor means that it can be installed either at the top or base of your tank, depending on whether you wish to detect the water is rise or fall. The float level switch is widely used in electronic, electrical, chemical, water treatment, drainage, and other walks of life level control and alarm.

• Contact Rating: 10W
• Switching Voltage: 100V
• Max Switching Voltage: 220V
• Switching Current: 0.5A
• Max Switching Current: 1.5A