The Nice Power R-SPS6010 is a 60V 10A 600W adjustable DC power supply designed for electric vehicle and e-bike battery testing, laboratory work, and electronics repair. BDTronics provides this DC power supply for engineers, battery manufacturers, technicians, and electronics professionals who need a stable, precisely adjustable DC source for EV battery packs, BMS modules, and charging circuits.

The R-SPS6010 delivers 0–60V adjustable voltage, up to 10A current output, and 600W power capability. It is well suited for simulating charging conditions, verifying BMS protection functions, testing battery management systems, and powering battery-related electronic circuits. Whether you are working on 48V, 52V, or 60V lithium battery packs, this variable bench power supply gives you the reliable DC output needed for accurate testing and validation.

Features:

• 0–60V adjustable voltage output with up to 10A current and 600W power capability
• Designed for EV, e-bike, and lithium battery pack testing (48V / 52V / 60V)
• 4-digit digital display for real-time monitoring of voltage, current, and power
• Suitable for BMS protection testing, battery charging simulation, and battery module evaluation
• Built-in Over Voltage Protection (OVP), Over Current Protection (OCP), short-circuit protection, and over-temperature protection
• Supports optional USB / RS-232 / RS-485 communication for automated test setups
• High efficiency of ≥85%
• Available in AC220V(±10%) and AC110V(±10%) input variants
• Compact bench-style design with output and input power cords included

Specifications:

Applications:

• EV and e-bike battery pack testing (48V, 52V, 60V lithium battery packs)
• Battery Management System (BMS) protection and function verification
• Battery charging simulation and charging module testing
• Battery pack quality inspection
• Laboratory and R&D electronics testing
• Electronics repair and troubleshooting benches
• Automated EV battery test systems when used with optional communication interfaces

How to Use:

1. Connect the input power cord to a compatible AC220V(±10%) or AC110V(±10%) mains supply matching your variant.
2. Connect the output power cord to your battery pack, BMS, or DUT (device under test) using correct polarity.
3. Set the target voltage and current using the front panel controls and monitor values on the 4-digit display.
4. Enable output and observe the voltage and current readouts to confirm correct operation.
5. For automated testing, connect the optional USB / RS-232 / RS-485 interface to your test PC or controller.
6. After testing, disable the output and disconnect the DUT before switching off mains power.

Compatibility:

• 48V, 52V, and 60V lithium battery packs used in e-bikes and EVs
• Battery Management Systems (BMS) and battery protection circuits
• EV charging control modules and charging test platforms
• General DC-powered electronic circuits and modules within the 0–60V / 0–10A range

Safety Information:

• Use the power supply only with the input voltage variant specified on the unit (AC220V or AC110V).
• Verify polarity before connecting any battery pack or device to the output terminals.
• Do not exceed the rated 60V / 10A / 600W limits of the supply.
• Ensure adequate ventilation around the unit during operation to avoid overheating.
• Disconnect mains power before performing any wiring changes.
• Do not open the enclosure; refer servicing to qualified personnel.

Package Includes:

• 1 x Nice Power R-SPS6010 DC Power Supply
• 1 x Output Power Cord
• 1 x Input Power Cord
• 1 x User Manual
• 1 x Warranty Card

Nice Power R-SPS6010, R-SPS6010, 60V 10A DC power supply, 600W adjustable DC power supply, EV battery testing power supply, BMS testing power supply, e-bike battery tester, variable bench power supply, 60V power supply Bangladesh, DC power supply for lithium battery, Nice Power, BDTronics