The DC 12V N/C Normally Closed Water Solenoid Valve G1/2 Inch FPD-270A is a plastic and copper electric solenoid valve intended for water-dispenser, washing-machine, and garden spray irrigation water control. BDTronics provides this valve for appliance replacement, electronics, prototyping, and related water-control applications in Bangladesh.

Features:

• Model FPD-270A with N/C normally closed operation
• DC 12V rated voltage with 12V-300mA rated current
• G1/2 inch thread for compatible water-line fittings
• Plastic and copper construction intended for long-time use
• E insulation grade
• Easy to install and suitable as a replacement for a compatible broken valve
• Designed for water dispenser, washing machine, garden spray irrigation, and similar water-control applications
• Normally closed type, intended for circuits where the valve is closed when de-energized

Specifications:

Applications:

• Water dispensers
• Washing machines
• Garden spray irrigation systems
• Compatible G1/2 inch water lines using DC 12V control

How to Use:

1. Confirm that the replacement valve matches the existing G1/2 inch thread and DC 12V electrical supply.
2. Shut off the water supply and electrical power before installation.
3. Install the valve in a compatible water line and tighten fittings without forcing the plastic body.
4. Connect the electrical terminals to a suitable DC 12V control circuit with the power switched off.
5. Check for leaks and verify correct open and closed operation before normal use.

Installation and Wiring:

Before installation, disconnect the water supply and electrical power. Match the G1/2 inch thread to compatible fittings and avoid over-tightening the plastic body. The valve is rated for DC 12V and 12V-300mA, so use a suitable 12V DC source and switching arrangement. Keep electrical connections insulated and dry. When replacing an existing valve, compare the original model, thread, voltage, pressure, and temperature ratings before installation. Wiring terminal markings are not specified in the source data, so follow the markings on the received unit or the original valve wiring.

Compatibility:

• Water dispensers with compatible G1/2 inch connections
• Washing machines requiring a compatible DC 12V normally closed valve
• Garden spray irrigation systems within the stated pressure and temperature limits
• Replacement use where the original valve matches FPD-270A, G1/2 thread, and DC 12V ratings

Safety Information:

• Use only with a DC 12V supply; do not connect directly to mains AC.
• Operate within the stated 0-55°C fluid temperature and 0.02-0.8 MPa water pressure limits.
• Use within the stated ambient conditions: altitude not exceeding 2500 m, ambient temperature 20-40°C, and relative humidity below 95% at 25°C.
• Disconnect power before installation or maintenance.
• Do not exceed the stated electrical, pressure, or temperature limits.

Package Includes:

• 1 x Solenoid Water Valve

DC 12V water solenoid valve, normally closed water solenoid valve, N/C solenoid valve, G1/2 inch solenoid valve, FPD-270A solenoid valve, plastic electric solenoid valve, 12V water dispenser valve, washing machine solenoid valve, garden irrigation solenoid valve, DC 12V solenoid valve Bangladesh, BDTronics