The Dual Type PEI Plate for the Bambulab P1S 3D Printer offers a versatile build surface, designed to enhance your 3D printing experience. With a unique two-sided design, one side features a textured PEI surface while the other side is smooth, giving you the flexibility to print a variety of materials with optimal adhesion and easy removal. The textured side ensures excellent grip for prints requiring a strong first layer, such as ABS and PETG, while the smooth side provides a pristine finish for filaments like PLA, ensuring a glass-like surface on your prints. Durable and reusable, this PEI plate is resistant to warping and wear, making it a long-lasting addition to your 3D printing setup.

Considerations:

• Deposition of dust and grease on the build plate decrease adhesion. It is recommended to regularly clean the surface with detergent and water to to maintain best adhesion.
• Increasing heatbed temperature enhances adhesion. Users need to adjust the temperature of the heatbed based on their specific requirements in order to achieve the most suitable level of adhesion.
• Carefully sanding the Textured PEI surface with fine-grit (600 was recommended) sandpaper can help restore adhesion.
• If bubbles appear on the bottom of the Smooth PEI sheet, heating it on the heatbed at a temperature of no less than 80 degrees for several hours can be helpful in eliminating the bubbles.
• Do not clean the Bambu Dual-Texture PEI Plate with Acetone, as it will damage the PEI surface.
• Bambu Lab recommends only using Bambu Lab official glue on the Bambu Lab build plates, and can not be held responsible for any damage caused to plates as a result of using third-party glue on build plates. 
• Always wait for a few minutes before removing printed models to allow the plate to cool down for easy print removal. This prevents damage to the plate and ensures a long lifetime of the product.
• The Bambu Dual-Texture PEI Plate is considered a consumable part, which will degrade over time. The warranty will only cover manufacturing defects, not cosmetic damage like scratches, dents, or cracks. Defective sheets upon arrival are the only ones covered by the warranty.

Specifications:

Note: To order the servicing spare parts, you must enter your valid 3D printer purchase order ID in the "Reference Order ID" field.