Bambu Lab Dual-Sided Textured PEI Plate 3D Printer Parts for X1/P1/A1 Series
In stock
Order before 12.00PM
Product Details / Bambu Lab Dual-Sided Textured PEI Plate 3D Printer Parts for X1/P1/A1 Series
Recommended Settings
Please note that other slicer settings might need to be adjusted based on the printed model and the filament requirements
| Materials | Heatbed Temperature | Glue Stick Required? | Upper Glass Cover Plate Removed? |
| PLA/PLA-CF/PLA-GF | 45~60℃ | No | Yes |
| ABS | 90~100℃ | No | No |
| PETG/PETG-CF | 60~80℃ | No | No |
| PET-CF | 80~100℃ | No | No |
| TPU | 35~45℃ | Yes | Yes |
| ASA | 90~100℃ | No | No |
| PVA | 45~60℃ | No | Yes |
| PC/PC-CF | 90~110℃ | Yes | No |
| PA/PA-CF/PAHT-CF | 90~110℃ | Yes | No |
Excellent first-layer adhesion, Improved durability
Self-release when cooled down
PEI is an excellent material for 3D printing applications due to its ability to withstand the repeated heating and cooling cycles of a printer heatbed. Prints come off easily when the temperature of the heatbed reaches room temperature, and we always recommend waiting until it reaches 35℃ or lower. If the print is still adheres to the plate, simply bend the steel plate and the model will fall right into your hands.
Compatibility with various filaments
PEI allowing it to print not only common materials such as PLA, TPU, and PETG, but also materials that require high temperatures like ABS and Nylon.
Prevent warping with reliable magnetic adhesion
The Bambu Texture PEI Plate features a 0.5mm thick stainless steel plate that enhanced magnetic adhesion. This helps to prevent warping and ensure optimal print quality during 3D printing, reducing the likelihood of the first layer detaching due to deformation. It also helps when printing larger models in materials that are prone to warping like ABS, PC and Nylon.
Textured surface finish
Bambu Texture PEI Plate offers a one-of-a-kind first-layer surface. Through the application of a powder-coating process, this PEI Build Plate creates a rugged texture that adds a texture to your prints.
Considerations
- Increasing heatbed temperature enhances adhesion. Users need to adjust the temperature of the heatbed based on their specific requirements in order to achieve the most suitable level of adhesion.
- Before auto-leveling, it is necessary to repeatedly rub the nozzle in the special wiping area of the build plate to completely remove any residual material at the tip of the nozzle. The coating in the special-designed wiping area will gradually become worn over time. This is normal and does not affect print quality or nozzle lifetime, so there is no need to worry about any quality issues.
- Deposition of dust and grease on the build plate decrease adhesion. It is recommended to regularly clean the surface with detergent and water to to maintain best adhesion.
- Bambu Lab recommends only using Bambu Lab official glue on the Bambu Lab build plates, and can not be held responsible for any damage caused to plates as a result of using third-party glue on build plates. Do not clean the Textured PEI with Acetone, as it will damage the PEI surface.
- Always wait for a few minutes before removing printed models to allow the plate to cool down for easy print removal. This prevents damage to the plate and ensures a long lifetime of the product.
- Carefully sanding the surface with fine-grit (600 was recommended) sandpaper can help restore adhesion.
- The latest firmware brings significant improvements to the Bambu Textured PEI Plate calibration using the Micro Lidar, and it is now fully compatible with the automatic calibration process.
- The Textured PEI plate is considered a consumable part, which will degrade over time. The warranty will only cover manufacturing defects, not cosmetic damage like scratches, dents, or cracks. Defective sheets upon arrival are the only ones covered by the warranty.
Product Specification
| Material |
PEI powder coating+ magnetic Stainless Steel Plate
|
|
Surface temperature resistance
|
Up to 180℃ |
| Flexible stainless steel plate thickness |
0.5 mm
|
|
Textured PEI coating thickness
|
0.075 mm
|
|
Usable print size
|
256*256 mm
|
|
Package size
|
300*270*17 mm
|
|
Package weight
|
450 g
|
|
Color
|
Gold
|
Request Stock
General Questions
What is the price of the Bambu Lab Dual-Sided Textured PEI Plate 3D Printer Parts for X1/P1/A1 Series in Bangladesh?
The latest price of Bambu Lab Dual-Sided Textured PEI Plate 3D Printer Parts for X1/P1/A1 Series in Bangladesh is BDT 5,500.00 . You can buy the Bambu Lab Dual-Sided Textured PEI Plate 3D Printer Parts for X1/P1/A1 Series at the best price on BDTronics.com or contact us via phone.
Where to buy Bambu Lab Dual-Sided Textured PEI Plate 3D Printer Parts for X1/P1/A1 Series in Bangladesh?
You can buy Bambu Lab Dual-Sided Textured PEI Plate 3D Printer Parts for X1/P1/A1 Series online by ordering on our website or directly collect by visiting our store in person. We provide home delivery service all over BD with cash on delivery and online payment method. It usually takes 1-2 days to deliver inside Dhaka and 2-3 days outside Dhaka.