ANYCUBIC Water Washable Resin V2.0 is the upgraded version of the popular “Water Washable Resin+”, featuring improved toughness, flexibility, durability, and faster curing performance. Designed for SLA, DLP, and LCD 3D printers operating within the 365–405nm wavelength range, this resin ensures high-quality, highly detailed, and long-lasting 3D prints with easier post-processing and minimal odor.

This V2.0 formula enhances your printing experience by reducing stickiness, improving impact resistance, and delivering consistent results across a wide temperature range. It’s ideal for functional parts, miniatures, prototypes, and artistic models where strength and finish quality are essential.

Features:

• Upgraded Performance Over “Water Washable Resin+”: Enhanced toughness, flexibility, and durability, offering stronger prints that resist cracking and breaking under stress.

• Water Washable – No Alcohol Needed: Clean your prints directly with water, thanks to its hydrophilic composition. Saves money on isopropyl alcohol and simplifies post-processing. Also compatible with the Anycubic Wash & Cure Machine and ultrasonic cleaners.

• Fast Curing and High Precision: Optimized resin formula with low shrinkage (3.7–4.2%) ensures dimensional accuracy and faster curing times for efficient 3D printing without sacrificing detail.

• Low Odor & Safer Printing: Refined formulation with significantly reduced odor, creating a more pleasant printing environment suitable for home or professional use.

• Low Viscosity and Excellent Flow: The resin’s 150–250 cP viscosity ensures smooth flow during printing, improving success rate and reducing print failures due to poor layer adhesion.

• Extended Shelf Life: With an improved chemical stability, the resin now offers up to 1.5 years of shelf life, maintaining its properties even under long storage conditions.

• Wide Compatibility: Suitable for most LCD, DLP, and SLA 3D printers with 365–405nm UV light, performing best with Anycubic Photon and Photon Mono series printers.

• Improved Model Stability: Designed to prevent softening or deformation in humid environments, ensuring strong and dimensionally stable prints in various climates.

Specifications:

• Wavelength: 365–405nm

• Density: 1.15–1.2 g/cm³

• Viscosity: 150–250 mPa·s (25°C)

• Surface Hardness: 80HD

• Tensile Strength: 30–45 MPa

• Elongation at Break: 8–15%

• Flexural Strength: 50–60 MPa

• Flexural Modulus: 1500–1600 MPa

• Molding Shrinkage: 3.72–4.24%

• Normal Exposure: 2–3s

• 1st-Layer Exposure: 35s

• Shelf Life: 1.5 years

Usage Notes:

• Shake the bottle thoroughly before use to ensure uniform mixing of pigments and resin components.

• Pour resin into the vat as needed and use appropriate printer exposure settings.

• After printing, clean models using water, 95% ethanol, or isopropyl alcohol, then cure under UV light for optimal strength.

• Always wear gloves during handling and ensure proper ventilation.

Precautions:

• Store resin in a sealed, dark, cool place (15°C–35°C), away from direct sunlight and heat sources.

• Do not leave resin exposed in the vat for long periods without use; transfer to a light-proof, airtight container for storage.

• In case of skin contact, wash thoroughly with water. Seek medical attention if irritation occurs.

• Avoid exposure to strong light sources or sunlight during printing.

• Ensure room temperature is optimal (18°C–35°C) for the best results; if too cold, preheat resin gently (not over 60°C).

ANYCUBIC Water Washable Resin V2.0, water washable 3D printer resin Bangladesh, Anycubic UV resin 1kg, low odor resin for 3D printing, SLA DLP LCD resin 405nm, easy clean resin for Anycubic Photon, photopolymer resin for 3D printer, upgraded Anycubic resin V2, strong flexible 3D printer resin, tough 3D printing resin Bangladesh, water soluble 3D resin, fast curing photopolymer, eco-friendly 3D resin, Anycubic resin Dhaka, durable 3D printing resin, high precision UV resin, low shrinkage 3D printer resin, professional 3D printing material, Anycubic Photon Mono compatible resin, 3D printing consumables Bangladesh, functional 3D print resin