The Aluminum Timing Belt Fix Block 9 x 40 x 5mm is a compact aluminum alloy clamp for joining or closing the open ends of a synchronous timing belt. BDTronics provides this fix block for 3D printing, CNC, robotics, and mechanical prototyping applications in Bangladesh.

Features:

• Timing belt fixing piece for the closed part of an open synchronous belt.
• Made from aluminum alloy with sandblasting oxidation finish.
• Compact 40 x 9 x 5 mm body with a silver / silver-white finish.
• Lightweight and strong construction as listed in the product details.
• Designed for use with 6 mm or 10 mm wide timing belts.

Specifications:

Specification	Details
Product Type	Timing belt fix block / belt fixing piece
Material	Aluminum alloy (sandblasting oxidation)
Size	40 x 9 x 5 mm
Belt Compatibility	6 mm or 10 mm wide timing belts
Color	Silver / silver white
Usage	Closed part of an open synchronous belt
Weight	0.01 kg
SKU	AI2916

Applications:

• Securing the open ends of timing belts in 3D printers and CNC machines.
• Belt tensioning and repair in DIY robotics and mechanical assemblies.
• Custom 3D printer builds and maintenance where 6 mm or 10 mm belts are used.
• General synchronous belt clamping for prototyping and small mechanisms.

BDTronics supplies this timing belt fixing piece for builders who need a compact belt clamp for 3D printer, CNC, and robotics assemblies.

How to Use:

1. Confirm the timing belt width is 6 mm or 10 mm before fitting the fix block.
2. Route the open belt ends into the fix block so the belt is held in the closed position.
3. Position the block where the belt ends need to be joined and secure the assembly according to your machine's belt clamp design.
4. Check belt alignment and tension before operating the machine.

Installation and Wiring:

This is a mechanical timing-belt accessory and does not require electrical wiring. Install it as part of the belt clamp or closed-loop section of an open synchronous belt, then verify that the belt is seated correctly and does not rub against other parts.

Compatibility:

• Compatible with 6 mm wide timing belts.
• Compatible with 10 mm wide timing belts.
• Suitable for timing belt and pulley assemblies in 3D printers, CNC equipment, robotics, and similar mechanical systems.

Safety Information:

• Disconnect power to the machine before installing or adjusting the belt clamp.
• Check that the belt is correctly aligned and secure before running the machine.
• Keep small parts away from children and inspect the fix block before use.

Package Includes:

• 1 x Fix Block 9 x 40mm for 6mm or 10mm Belt (as listed in the package section).

Note: The product package section lists 1 x fix block, while a separate technical table on the product page shows a package quantity of 40 pcs. Please confirm the quantity before ordering.

Aluminum Timing Belt Fix Block, Timing Belt Fix Block 9x40mm, 9x40x5mm belt fixing block, 6mm timing belt fix block, 10mm timing belt fix block, open synchronous belt clamp, timing belt fixing piece, 3D printer timing belt block, aluminum belt clamp, BDTronics