The 2 in 1 out Two Colors Print Head Hotend Extrusion Assembled Extruder is designed for 3D printing enthusiasts and professionals who want to create vibrant, multi-color prints with precision and consistency. This dual-color hotend allows users to mix and switch between two filament colors seamlessly using a single nozzle output. Compatible with a wide range of Creality 3D printers, it provides reliable performance, smooth extrusion, and excellent thermal stability for high-quality prints.

Features:

• Dual filament input with single output design for color mixing and gradient printing

• Compatible with multiple 3D printer models including CR-10, CR-10 V3, CR-10 MAX, CR-10 V2, CR-6 SE, CR-10SPro V2, Ender-3, Ender-3S, Ender-3 PRO

• Durable aluminum alloy and stainless-steel construction for long-lasting use

• High-precision 0.4mm nozzle for fine detail printing

• Efficient 24V 40W heating system for fast temperature rise and stable performance

• Supports PLA, ABS, PETG, TPU, and other 1.75mm filaments

• Easy installation with pre-assembled design, reducing setup time

• Smooth filament feeding, reduced clogging, and consistent extrusion

• Perfect for multi-color models, gradient transitions, and complex designs

Specifications:

• Product Type: 2 in 1 out Hotend Extruder

• Material: Aluminum alloy + stainless steel

• Input: 2 Filament Inputs

• Output: 1 Nozzle Output

• Voltage: 24V

• Power: 40W

• Nozzle Diameter: 0.4mm

• Color: Black

• Filament Size: 1.75mm

• Temperature Range: Up to 260°C

• Compatibility: CR-10 / CR-10 V3 / CR-10 MAX / CR-10 V2 / CR-6 SE / CR-10SPro V2 / Ender-3 / Ender-3S / Ender-3 PRO

How to Use:

• Connect the hotend to your 3D printer following the wiring diagram for your printer model.

• Load two different filament colors into the dual input slots.

• Configure your slicer software (e.g., Cura or Simplify3D) to manage the two color filaments.

• Adjust mixing ratios for desired color gradients or switch between filaments for two-tone prints.

• Preheat the hotend to the correct temperature for your filament type.

• Begin printing and monitor the extrusion to ensure smooth flow.

Installation Instructions:

• Turn off and unplug your 3D printer before installation.

• Remove the existing hotend and mount the 2-in-1-out extruder using the included fittings.

• Connect the heating cartridge and thermistor cables properly to your control board.

• Secure the extruder with screws and ensure stable alignment.

• Test heat and extrusion functionality before printing.

Maintenance Tips:

• Regularly clean the nozzle to prevent clogs.

• Avoid mixing filaments with vastly different melting points.

• Use filament retraction settings in slicer to reduce oozing.

• Periodically check the wiring and screws for looseness.

• Replace the nozzle if extrusion quality decreases over time.

2 in 1 out hotend, two color 3D printer hotend, mixed color extruder, J-head hotend, 24V 40W hotend, dual input single output hotend, CR-10 hotend, Ender-3 dual color extruder, multi-color 3D printing, 3D printer parts Bangladesh, dual filament extruder, color mixing 3D printer hotend, aluminum alloy hotend, 0.4mm nozzle 3D printer, Creality hotend replacement, 3D printer hotend accessories, PLA ABS PETG TPU hotend, high temperature extruder, 3D printer color mixing head, two color extrusion head